Spraying machine for slurries, paints and putties
1 Item Items
Warning: Last items in stock!
|Output||1.5 - 9 l/min|
|Pumping distance||35 m|
|Pumping height||10 m|
|Pumping pressure||0 - 25 bar|
|Max Grain size||2.5 mm|
INNOVATIVE AND STABLE
Innovative and consistent are no opposites. These two characteristics characterize this compact feed pump which can be used for spraying, pumping,
Injecting and filling of liquid and pasty masses was designed.
PERFORMANCE IN SURPLUS
The compact, light-powered unit is a real powerhouse. With 1.5 kW and a continuously variable output of 0.6 to 9.5 l / min, working pressures of up to 25 bar and hose lengths of up to 35 m can be achieved.
FINISHING TO THE DETAIL
Due to the modular structure of the Pictor is decomposed in no time in your main components. Just as fast it is cleaned and reassembled. The factory-supplied MAI EASY-CLEAN components save time, facilitate cleaning, maintenance and commissioning and keep operating costs permanently low.
THE ADVANTAGES AT A GLANCE
Here are some features and features that are not commonplace for a long time:
• Easy to transport (fits into any small car)
• Guaranteed stainless thanks to plastic and stainless steel
• Ingeniously easy to use and clean
• Wide range of applications (the optimal device in the rehabilitation area)
• Single phase 230 V - available at every construction site
Lime paints, sealing slurries, thick coatings, decorative plaster, composite mortar, concrete contact, concrete putties, quartz primer, spray waterproofing, synthetic resin and mineral fine plasters up to 2 mm, facade paints, joint and sealing slurries, grout, microfine cements, injection glue, borehole suspensions