Workshop press Tigermetal 200 t automatic

The Kai-Trade Dual Hydraulic Pump Hydraulic Shop Press is the perfect tool for your heavy-duty needs. With an electric hydraulic pump and an additional manual pump for precise force control, this press gives you the versatility you need in your workshop. 

The lifting cylinder can be moved laterally continuously, making it easy to adjust and manipulate your workpieces. Additionally, the height of the crossbar is adjustable to accommodate different part sizes. 

With a solid, fully pre-assembled ready-to-connect machine frame, this workshop vise offers you durability and ease of use. The passage width of the stand is 800 mm, which allows you to work with large pieces comfortably.

Get the Hydraulic Workshop Press with Dual Hydraulic Pump from Kai-Trade and maximize efficiency in your workshop!

Technical characteristics of the series workshop press:

• 400 mm double acting stroke

• Fully hydraulic system with electrically driven hydraulic pump

• The pressure cylinder can be moved laterally continuously

• The free height of the stand can be variably adjusted using a movable support table (including a chain as an aid)

• Pressure display using a manometer

• Engine protection switch with emergency stop control unit

• Delivery is completely ready for connection, pre-assembled with 400 V CEE plug, operating instructions in German and CE declaration of conformity, but without operating fluids (without hydraulic oil)

Advantages of the Workshop press Tigermetal 200 t

- Welded frame: more stability

- 400mm double-acting stroke

- Fully hydraulic system, no compressed air or similar

- Hydraulic unit compactly installed in the upper frame: the lower area of ​​the press is freely accessible => long rods/components can be inserted laterally

- Strong drive power, so that depending on the model, approx. 8-10 mm/s can be moved even when the cylinders are under load. Many other providers can only do 2 mm/s

- Valve with closed zero position: Press keeps the pressure in the zero position / with the engine off

- Hand pump as standard on WH model: Particularly suitable for fine work, as the hydraulic pressure can be built up slowly by hand